Meet the new BPX9010 bale processor. This workhorse combines simplicity, durability and versatility — an all-around processor ready to perform a variety of applications. Distribute a consistent, uniform windrow of crop along the bunk line or out in the pasture. Or spread bedding with consistency and accuracy at ranges up to 50 ft (15.2 m). The BPX9010 bale processor simplifies the process of processing bales.
Vermeer BPX9010 Bale Processor
SPECS
Length
- 15.6 ft (4.8 m)
Height
- 8.5 ft (2.6 m)
Width - Transport
- 8.2 ft (2.5 m)
Width - Operation
- 11.2 ft (3.4 m)
Weight
- 1480 lbs (671.3 kg)
Drawbar Weight
- 1460 lbs (662.2 kg)
Tractor Requirements
Horsepower Required- 85 hp (63.4 kw)
Horsepower maximum
- 210 hp (156.6 kw)
PTO speed
- 1000 rpm
Hydraulics type
- 3-Double-Acting
Hydraulic Pressure
- 2000 psi (137.9 bar)
Hydraulic flow rate
- 8 gpm (30.3 L/min)
Standard Details
Axle adjustment- 12" (30.5 cm) each axle
Bale rotation
- 3 roller chains with bolt-on cross slat
Bale size capacity
- Two bales, 6' x 5' (1.8 m x 15 m)
Bale weight capacity
- 2500 lbs (1134 kg)
Cut Control Bar Adjustment
- Hand lever with 5 settings
Cut Control Bar Quantity
- 7
Discharge Direction
- Right hand
Flail description
- 7/16" x 5-9/16" tempered spring
Flail Drum Diameter
- 26.8 in (68.1 cm)
Flail Drum Length
- 78 in (198.1 cm)
Flail Drum Speed
- 1000 rpm
Flail Quantity
- 30
Horizontal spread distance
- 50 ft (15.2 m)
Tire Size - Standard
- 14L x 16.1FL
Torque Protection - Driveline
- Shear bolt
Hitch Jack
- 5000 lbs (2268 kg)
Safety chain kit
- 10000 lbs (4535.9 kg)
Optional Features
Extra Cut Control Bars Kit- Yes
Flotation Tires
- 16.5L-16.1SL 6 SOFTRAC II
Hydraulic Cut Control Bar Kit
- Yes
Square bale kit
- Yes
Two hydraulic remote kit
- Yes
Automatic bale feed system kit
- N/A
FEATURES
Adjustable rotor cleaner
Weldment attached to the cut control bars to help manage build-up of net or twine left on the rotor.
Allows producer to help reduce build-up of net or twine on the rotor or to help minimize the amount of net or twine in the feed.
Bale lift system and frame
T-style frame with heavy-duty feed system.
A vertical bale lift system makes it more efficient to load bales and help reduce stress on the machine. Plus, the robust T-style tongue frame has no welds or gussets at high stress points and is bolted high on the tub, helping enhance durability.
Direct drive system
Power distributed through two gearboxes.
The design allows operators to expect less maintenance and helps increase durability and efficiency when compared to chain or belt driven processors.
Offset rotor
Rotates and pulls material preventing fall-through.
An offset rotor rotates and pulls material through for more consistent feeding and helps prevent uncontrolled fall-through from slowing down the machine. Process whole bales of varying shapes (with a powered side-wall kit) and qualities to produce uniform windrows, hit tight spots along the bunk line or spread evenly up to 50 ft (15.2 m) for bedding.
Right-side discharge
Discharge located on same side as tractor hydraulic controls.
Right-side discharge located on the same side as most tractor hydraulic controls gives the operator visibility.
Rubber curtain
Rubber curtain at the backside of the machine and at discharge.
The unique rubber curtain helps minimize spillage from the back of the machine, with the ability to consistently feed over a 32 in (81.3 cm) feed bunk wall. The curtain can be raised to broadcast up to 50 ft (15.2 m).
Slat and chain bed
Feeds bale consistently into the rotor – reducing the need for reverse rotation.
The slat and chain bale rotation design feeds bales more consistently into the rotor, reducing the need for reverse rotation. Heavy-duty sprockets and chains allow misshaped bales to be processed more smoothly. Long-lasting bushings replace bearings. Split shafts let you perform maintenance without removing the entire bed.
Square bale capabilities
Optional square bale kit including straight forks and optional powered sidewall.
Optional square bale kit gives you the ability to process large square bales in addition to round bales.
Toolless self-cleaning cut control bars
Dual adjustments can now be made on the cut control bar from the outside of the machine.
Ten different settings allow producers to be in control of processing speed and material size.
Tub profile
Adjustments to three tub walls and a shortened discharge chute.
Designed to help optimize bale rotation and feeding and minimize plugs.